May 08, 2023 22:00 JST

Source: Doubleview Gold Corp.

Doubleview Releases Further Analyses from Lisle Zone Drill Holes

Vancouver, British Columbia, May 8, 2023 - (ACN Newswire) - Doubleview Gold Corp. (TSXV: DBG) (OTCQB: DBLVF) (FSE: A1W038) (the "Company or "Doubleview") is pleased to announce assay results of Hat Project drill holes H038 to H 043. The Hat Project is a large alkalic copper-gold porphyry-type deposit located in northwestern British Columbia that since 2011 has been explored by Doubleview utilizing technical surveys and diamond drilling operations.

Hat Property surveys and drilling have largely been focused to the Lisle copper-gold-cobalt-scandium mineral zone. Principal minerals are chalcopyrite, pyrite and magnetite hosted in volcaniclastic and gabbroic formations. The Lisle Zone has indicated dimensions of approximately 2.7 km by 1.7 km and is still being delimited laterally and at depth.

Drill holes H038, H039 and H040 explored north extensions of the Lisle Zone. Hole H041 explored the far east extension of the Lisle Zone. Holes H042 and H043 explored west extensions. Assays are summarized as follows:

North side of the Lisle Zone:

  • Drill hole H038 intercepted 440.3 meters* with 0.82% Cu Equivalent** from surface, including 186.0 meters with 0.89% CuEq.

  • Drill hole H039 intercepted 549.2 meters with 0.76% Cu Eq from near surface, including 146.7 meters with 0.87% CuEq.

  • Drill hole H040 intercepted 561.2 meters with 0.78% Cu Eq from near surface, including 277.3 meters with 0.79% CuEq.

East side of the Lisle Zone:

  • Drill hole H041: intercepted 485.0 meters with 0.81% Cu Eq from 66m depth, including 125.0 meters with 0.96% Cu Eq.

West side of the Lisle Zone:

  • Drill hole H042: intercepted 179.0 meters with 0.76% Cu Eq from surface, including 49.0 meters with 0.92% Cu Eq.

  • Drill hole H043: intercepted 280.2 meters with 0.79% Cu Eq from near surface, including 149.0 meters with 0.98% Cu Eq.

Note: (*) Drill hole intercepts are presented as drilled. The company does not have sufficient information to provide true deposit dimensions.

Drill hole locations are shown in Figures 1, 2, 3 and 4 and coordinates and other location details are presented in Table 1. Significant intercepts are presented in Table 2 and discussed below.

Farshad Shirvani, Doubleview's president and CEO, comments that "Certain metals, including copper, cobalt, silver, PGMs and scandium, have been identified as strategically important in the development of non-fossil fuel technology related to mitigation of climate change. Doubleview's polymetallic Hat property may become a significant source of strategically important metals. Assay results have shown many long intervals of elevated values of copper, cobalt, scandium and other critical metals, potentially making it a unique and valuable domestic resource to supply scarce metals required by advanced technologies. The Company currently is conducting metallurgical research into several innovative cost effective and environmentally friendly low temperature extraction processes that we believe will make Doubleview's Hat project an important source of critical metals that are vital to the growth and evolution of Canada's climate-related initiatives".

TABLE 1. Drill Hole Data

Drill Hole ID UTM - East UTM - North Elevation Max-Depth Dip Azimuth Area
H038 348,035.0 6,454,681.0 1,034 463.3 -57.5 44.5 Lisle North
H039 348,035.0 6,454,681.0 1,034 615 -61.2 222.4 Lisle North
H040 348,035.0 6,454,681.0 1,034 675 -55.4 233 Lisle North
H041 348,348.0 6,454,186.0 1,008 723 -70.2 255 Lisle East
H042 347,148.0 6,454,257.0 972.5 201 -55 180 Lisle West
H043 347,148.0 6,454,257.0 972.5 304 -55 280 Lisle West

TABLE 2. Assay results

DDH From (m)

To

(m)

Length
(m)

Ag

(g/t)

Au

(g/t)

Co

(g/t)

Cu

(%)

Sc

(g/t)

CuEq (%)* incl Sc2O3
H038 6.1 446.4 440.3 0.47 0.08 69.6 0.11 31.9 0.82
Inc. 18 24 6.0 2.30 0.61 136.1 0.42 26.5 1.34
Inc. 187.2 373.15 186.0 0.76 0.12 90.0 0.19 29.7 0.89
Inc. 317 364.15 47.2 1.00 0.19 121.2 0.30 29.2 1.03
H039 24 573.2 549.2 0.25 0.08 63.3 0.09 29.8 0.76
Inc. 321.3 468 146.7 0.37 0.15 75.1 0.14 30.5 0.87
Inc. 372 468 96.0 0.30 0.18 76.4 0.14 30.7 0.89
H040 8.5 569.7 561.2 0.49 0.06 64.6 0.09 31.0 0.78
Inc. 193.4 470.7 277.3 0.78 0.08 87.0 0.15 28.2 0.79
Inc. 199 252 53.0 2.12 0.11 157.3 0.26 27.5 0.93
H041 66 551 485.0 0.22 0.10 58.4 0.13 30.3 0.81
Inc. 413.5 567 153.5 0.24 0.16 52.1 0.22 29.4 0.91
Inc. 426 551 125.0 0.26 0.18 53.4 0.24 30.9 0.96
H042 0 179 179.0 0.57 0.07 71.6 0.09 29.8 0.76
Inc. 12 53 41.0 0.14 0.01 56.1 0.03 36.4 0.79
Inc. 132 173 41.0 1.47 0.17 105.8 0.19 29.4 0.92
H043 23.8 304 280.2 0.37 0.07 71.2 0.12 30.1 0.79
Inc. 29.8 281 251.2 0.37 0.07 73.3 0.13 30.4 0.80
Inc. 94 173 79.0 0.56 0.11 97.5 0.22 24.8 0.81
Inc. 160 173 13.0 1.02 0.12 130.3 0.34 32.9 1.09
Inc. 139 281 142 0.44 0.07 79.5 0.15 32.6 0.98
Inc. 139 232 93 0.45 0.08 89.6 0.18 33.0 1.02
Inc. 139 198 59 0.66 0.10 108.8 0.26 28.4 1.00
Inc. 139 170.1 31 1.03 0.14 143.6 0.40 23.2 1.04
Notes:
- Metal equivalents should not be relied upon for future evaluations.
- Drill hole intercepts included in this news release are core lengths that may or may not be true widths of mineralization. It is not possible to determine true widths.
**Copper Equivalent (CuEq%) is estimated using the following metal values and equations:
- *CuEq(%) =(Ag(g/t) x Price_Ag x Rec_Ag/31.1035 + Au(g/t) x Price_Au x Rec_Au/31.1035 + Co(%) x Price_Co x Rec_Co x 22.0462 + Cu(%)x Price_Cu x Rec_Cu x 22.0462 + Sc(g/t) x Price_Sc x Rec_Sc x Sc_con) / (Price_Cu x 22.0462)
- Price_Ag = $22.20/troy oz, Price_Au=$1,812.14/ troy oz, Price_Co = $23.30/lb, Price_Cu = $3.84/lb, Price_Sc =$2.0/g
- Rec_Ag= %68 , Rec_Au= %89, Rec_Co= %78, Rec_Cu= %84 . Rec_Sc= %56, Sc_con= Sc to Sc2O3 Conversion is 1.533

Quality Assurance and Quality Control:

Given the importance of accurate assay results, extra measures are taken to ensure the quality of Hat Project assay data. As part of our QA/QC protocol, fresh sample pulps of 5% of the samples were re-assayed when results were deemed unsatisfactory. Replicate assays were conducted by a second accredited laboratory and showed possibly material variances, especially for critical metals in the Hat deposit. Confirmation work is ongoing and may result in further re-sampling and re-analysis.

The following map and sections show the location of the reported drill holes.

Figure 1. Drill PLAN MAP

Cannot view this image? Visit: https://images.newsfilecorp.com/files/8003/165172_01b4dbbd542f4abc_001.jpg

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8003/165172_01b4dbbd542f4abc_001full.jpg

Figure 2. Section A - A'

Cannot view this image? Visit: https://images.newsfilecorp.com/files/8003/165172_01b4dbbd542f4abc_002.jpg

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8003/165172_01b4dbbd542f4abc_002full.jpg

Figure 3. Section B - B'

Cannot view this image? Visit: https://images.newsfilecorp.com/files/8003/165172_01b4dbbd542f4abc_003.jpg

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8003/165172_01b4dbbd542f4abc_003full.jpg

Figure 4: Section C - C'

Cannot view this image? Visit: https://images.newsfilecorp.com/files/8003/165172_01b4dbbd542f4abc_004.jpg

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8003/165172_01b4dbbd542f4abc_004full.jpg

Doubleview maintains a website at www.doubleview.ca.

Qualified Persons:

Erik Ostensoe, P. Geo., a consulting geologist, and Doubleview's Qualified Person with respect to the Hat Project as defined by National Instrument 43-101 Standards of Disclosure for Mineral Projects, has reviewed, and approved the technical contents of this news release. He is not independent of Doubleview as he is a shareholder in the company.

Cautionary Note: Although a mineral resource estimation is currently being prepared by an independent engineering firm, no mineral resources have been estimated at the Hat Property and there is no assurance that further work will result in the Lisle Zone, or other zones if present, being classified as mineral resources.

About Doubleview Gold Corp

Doubleview Gold Corp., a mineral resource exploration and development company, is based in Vancouver, British Columbia, Canada, and is publicly traded on the TSX-Venture Exchange [TSXV: DBG], [OTCQB: DBLVF], [FSE: A1W038], [Frankfurt: 1D4]. Doubleview identifies, acquires and finances precious and base metal exploration projects in North America, particularly in British Columbia. Doubleview increases shareholder value through acquisition and exploration of quality gold, copper and silver properties and the application of advanced state-of-the-art exploration methods. The Company's portfolio of strategic properties provides diversification and mitigates investment risks.

On behalf of the Board of Directors,

Farshad Shirvani, President & Chief Executive Officer

For further information please contact:

Doubleview Gold Corp
Vancouver, BC Farshad Shirvani
President & CEO

T: (604) 678-9587
E: corporate@doubleview.ca

NEITHER TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.

Certain of the statements made and information contained herein may constitute "forward-looking information." In particular references to the private placement and future work programs or expectations on the quality or results of such work programs are subject to risks associated with operations on the property, exploration activity generally, equipment limitations and availability, as well as other risks that we may not be currently aware of. Accordingly, readers are advised not to place undue reliance on forward-looking information. Except as required under applicable securities legislation, the Company undertakes no obligation to publicly update or revise forward-looking information, whether as a result of new information, future events or otherwise.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/165172

Source: Doubleview Gold Corp.
Sectors: Metals & Mining, Daily Finance, Daily News, Local Biz

Copyright ©2024 ACN Newswire. All rights reserved. A division of Asia Corporate News Network.

Related Press Release


Doubleview Gold Corp Is Concluding the Successful Drill Season of 2024
November 26 2024 22:59 JST
 
Doubleview Gold Corp Announces Closing of Private Placement for Total of $4,027,000
November 16 2024 01:10 JST
 
Doubleview Announces First Drill Results of This Season
October 16 2024 17:09 JST
 
Doubleview Provides Exploration Update at the Hat Polymetallic Mineral Deposit, 2024 Drilling Now Exceeds 7,500 m
October 01 2024 21:09 JST
 
Doubleview Announces Drilling at the Hat Polymetallic Deposit
July 29 2024 21:09 JST
 
CORRECTION FROM SOURCE: Doubleview Reports Maiden Mineral Resource Estimate
July 26 2024 21:00 JST
 
Doubleview Gold Corp. Announces Significant Copper and Gold Intervals, Including 6.94% Copper and 8.29 g/t Gold (11.27% Cu Eq[-Sc]) Over 4 meters, from South Lisle and Main Lisle Zones of Hat Porphyry Polymetallic Deposit
February 27 2024 02:29 JST
 
Doubleview Drilling Continues to Extend the "Gold Rich Zone" Within the South Lisle Zone
February 12 2024 21:59 JST
 
Doubleview Reports New Discovery: Gold Rich Zone Within the South Lisle Zone - Drill Interval of 405m of 0.21 g/t Gold (0.84% CuEq) That Extends the Main Lisle Deposit by 240 Meters
January 16 2024 22:00 JST
 
Doubleview Gold Corp Provides End of 2023 Exploration Update at the Hat Polymetallic Project
November 30 2023 21:59 JST
 
More Press release >>

Latest Press Release


More Latest Release >>